Plot multiple locations on a map. Fully customize your maps and share them with friends.

Processing
Processing
Close Window

Address Description

If the Header 1 format is used, the legend will only display that text. All text will display in the marker description.


Close Window

Address Single Line Field

Enter your full address or your latitude & longitude coordinates.

Address Format: When entering the your address you can enter as little as the country, but if you cannot just put a street address, you must also include the city and state/province because there are SEVERAL locations around the world that have the same street name.

Example by Country:

Germany

Example by City:

Toronto, Canada

Example by Street:

1234 Elm Street, Oklahoma City, Oklahoma

Latitude & Longitude Format: To list both latitude and longitude they must both be seperated by a comma.

Example: ~38.889510,-77.032000

Close Window

Group Name

Assign Groups to your markers

Group Names: Group names help you associate your markers in groups. Using this option and having the "Show Groups" check box (located under the Batch Address Box) checked, you can show or hide all markers assigned in that group.

Format in Batch Address Box:

Address|Description|Marker|Group Name

example: 1600 Pennsylvania Ave, Washington, DC|The White House|Blue|Presidents

The address above is assigned to the group "Presidents"

 

You can use the Group Name text box to assign a group to addresses that are in the "Batch Addresses" box.

Quick Example:

  • California|||West
  • Nevada|||West
  • Pennsylvania|||East
  • New York |||East

The states California and Nevada would be assigned to a group called "West" where the states Pennsylvania and New York will be assigned to a group called "East."

 

If you wish to do several groups, using the Group Name text box, simply plot one group of addresses, type your group description in the "Group Name" text box, hit the submit button, then add your next group and again, type your new group description in the "Group Name" box.

If you leave the Group Name box blank all addresses will be assigned to group "group0". If you do not wish to display the "Group Name" Legend, just unclick the "Group Name" check box located underneath the "Batch Addresses" box.

tools markerTool Marker - Add markers, lines and geometric shapes to your map without using an address.

Simply double click on your map and a small tool icon will appear. This is your Tool Marker. You can drag this icon to any specific location and when you click on the icon you can:

  • Get a points specific Latitude & Longitude
  • Add Lines
  • Get the length of a line in miles and kilometers
  • Create a polygons
  • Add a marker
  • Center your map at the current zoom level and center point when the map loads.

Download KML Files of your Maps (v2.65)

Copy and Paste fully detailed Excel Spreadsheets and have Multiplottr do the design work for you.
See our detailed example.

KML Markers are friendly with Google Earth and Google Maps

New Marker Colors have been added. Cyan, Violet, Purple and Lime.

Download KML Files of your Maps (v2.14)

You can now download a kml file of your map. Just plot your map, then click the button "Download KML" - it is located under the "Submit" button. We still have some formatting clean up and we will also be adding the lines and polygons, for right now you can do markers, but hey it looks GREAT in Google Earth.

Embed your map (v2.13)

into your blog, website or what ever! Just go to the My Maps or Public Maps tab and click on the Embed Map in URL, copy the code, place it in your website and there ya go!
Note: Make sure you declare your map width and size before you submit and save it. These fields can be found above the "Submit" button.

Description WYSIWYG (v2.12). Multiplottr's marker description uses HTML format. If you would like to have an easy time on detailed descriptions, use our Address Line Tool (Above the Batch Addresses Box). The Description box will pop up a tool to format your text the way you want it. You can even include images! Give it a try!

Group Names (v2.11). Using Group Names you can assign your markers to designated groups that then can be turned on or off using the Group Legend. You show or hide this legend by using the "Show Groups" checkbox that is located under the "Batch Addresses" box. More Info.

Designed and Created by
Corey Kliewer at CLiK Productions.com

Database and Programming by
Luis Rivera at AvanteLogic.com

Updated: Version 2.67 Dec 21, 2009

Multiplottr.com is a free service to all. Help keep Multiplottr.com
Online and Running

Multiplottr is being updated and revamped.

If you would like to see how it is going. Check out the MULTIPLOTTR BLOG to see where I am in the development of the site. Or just go to the new site directly: MULTIPLOTTR 3.0 BETA. Its a work in progress, so its not ready yet. But I would love to get your feedback so that Multiplottr is designed for our community in mind.

Thanks!

Corey

MultiPlotter is not IE6 friendly, so we suggest that you upgrade your browser to Internet Explorer 8, or use Firefox, Safari or Opera.

Here are two Excel templates you can use to create your maps. Both use a little html, but I think you should be able to understand how it works.

Multiplottr - Plot, save and share multiple addresses with an easy to create customized map.

Multiplottr allows you to map, save and share multiple addresses on Google Maps. Customization is easy! You have a wide variety of markers to choose from, and you can give your own alternative description rather then displaying the full address. Add markers, lines and polygons with ease!

Don't Forget! If you wish to save your map - you need to be REGISTERED and you must hit the SAVE button.

Start Mapping Now

Just copy everything from the excel spreadsheet and paste it into the Batch Addresses box.

Have a great mappy day!

Corey

Join the Multiplottr Facebook Group

 
cyanlimepurpleViolet
  1. Multiplottr
  2. Instructions
  3. Multi-Directions
  1. You can give each individual address its own unique description and distinct map marker color by using the One Address Per Line entry system.
  2. If you have have a bunch of addresses, you can use the Open Batch Control and list them their. Make sure you place each address on its own line .
    1. Add description to your Batch Listing just place a pipe | after your address and then give your description. IE: 1600 Pennsylvania Ave, Washington, DC | The White House
    2. Add a specific color to your Batch Listing by adding "|RED" or "|BLUE" or "|GREEN" or "|GREY" or "|YELLOW".
      If you want to keep the Address as your description just use two colons - "||Red" or "||BLUE" etc.
      Example: 1600 Pennsylvania Ave, Washington, DC | White House | Blue
      or 1600 Pennsylvania Ave, Washington, DC || Blue
  3. Remove a map marker by double clicking on the bottom point.
  4. Define height, width of the map with the tool above the submit button.
  5. We Got Serious Latitude... and Longitude. Yup, Multiplotter can plot that too! In place of the address insert your latitude seperated with a comma and then your longitude. Your address should look like this:
    38.8964,-77.0251 - this will work the same way in the single address bar or in Batch Control.
  6. WE GIVE YOU LATITUDE & LONGITUDE: We know you love Multiplotter so much, that you don't want to leave the site and look up your latitude & longitude, so now, if you double click on the map, it will create a tool-marker. Single click on it, and you will get your coordinates, double click at the bottom of the icon, and it will disappear. Oh yea, the icon is draggable too!
  7. LINES: Double click on the map to create a mini-marker, single click on the marker to open the Info Window, and choose "Line Tool " to create a line point. Then you can single click on the map to continue your line. When finished, click on one of the blue dots on the line and choose "Complete Line". The line information will be placed in the Address Batch Box.
  8. GET DISTANCE! When plotting lines, you will notice a little blue dot will appear. When you click on that blue dot it will give you the distance, in miles and kilometers, from that point to the first point on the line and the distance from that point to the previous point.
  9. Numbered Markers: Change the Marker description to read "NUMBER" and Multiplotter will display your plots in numberic order (Up to 200).
  10. Polygons: Just like making lines you can now make Polygons. Double click on the map to create a mini-marker, single click on the marker to open the Info Window, and choose "Polygon Tool " to create a polygon point. Then you can single click on the map to continue your polygon. When finished, click on one of the blue dots on the polygon line and choose "Complete Polygon ". The polygon information will be placed in the Address Batch Box. When you hit the submit button, you will see a completed polygon
  11. Change the colors of your Lines and Polygons: simply add a hexidecimal code for your line or polygon description and TADA, you know have a changed color. NOTE: If you put anything other then a hexidecimal code then your line or polygon will not show.
    • Example: An orange line would looklike this:
      ~74.68325030051861,-63.984375|#f5780a|LINE1
      ~75.75894014501688,7.734375|#f5780a|LINE1
    • Example: A purple polygon would look like this:
      ~78.56048828398782,-100.1953125|#d10af5|POLYGON3
      ~72.81607371878991,-113.203125|#d10af5|POLYGON3
      ~72.71190310803662,-88.2421875|#d10af5|POLYGON3
      ~78.56048828398782,-100.1953125|#d10af5|POLYGON3
  12. Get Multiple Directions to your plotted locations - Click on your icons after they are plotted, select " Add to Multi-Direction ", Then go to tab "Multi-Directions" and select "Map It". A new window will pop up with directions to your addresses.
  13. Embed Your Saved Map to your website - After Registering to Multiplottr.com and saving your map, click on the MyMaps tab, there you will see a listing of saved maps. Under each map you will see several links, click the link labeled "[Embed Map in Url]". This will show you script code that you just simple need to copy and paste into your html of your website. - Dont forget to make your map the size you want to fit on your website.
  14. Send your map link to your friends - You just need to use the link from "[View Map in New Window]".  
  15. Add your plotted map onto your website: For temporary sake, we now have a way for you to put your plotted map onto your blog or website. We handle this by using an Iframe.
    1. First off you need to copy and paste your plotted code into a text file and save that to your website, or someplace you can accesses it by a url address.
      • Important: I URGE you to use the CENTER option from the Customized Marker option - Double click on your map, move the mini-icon to the center of your map and choose "Center of Map" this will save your center of the map, and the zoom level you are on.
    2. Add this code to your html page 
      • <iframe
src='http://www.multiplottr.com/MULTIPLOTTRCUSTOMLoad.php?mapWidth=1024px&mapHeight=600px&mapZoom=4&mapControl=true&mapControlSize=large&mapType=true&mapOverview=true&mapDatabase=http://www.multiplottr.com/datafiles/5mileRun.txt'name='mapwindow' width='400' height='600' SCROLLING='no' frameborder='0' id='mapwindow'>
</iframe>
        You must use all the values indicated:
        • mapWidth = [number value] Width of your map
        • mapHeight = [number value] Height of your map
        • mapZoom = [number value from 1 - 22] if you didnt indicate the center of your map by the custom mini icon feature - you can declare your zoom level here
        • mapControl = [true/false] Allows people to zoom in and zoom out of the map
        • mapControlSize = [small/large] you have an option of small or large
        • mapType = [true/false] allows people to switch from Map - Satelite - Hybrid View
        • mapOverview = [true/false] allows people to see a mini-over view map on the bottom right had of the map
        • mapDatabase = the url of your database text file
        • width, height, scrolling, and frameborder - controls the appearance of your Iframe
    • If you have any problems dont hesitate to contact me, either on the chat box above or by email
    • Please give a link to www.multiplotter.com if you use it!

 

This is a registered users area. Login or Create a new account
Search maps: [Clear search]

  • test2af - by dinotak2
    testghj
    [View Map in New WIndow]  [Embed Map in Url]  
  • test345 - by plitv001
    test345
    [View Map in New WIndow]  [Embed Map in Url]  
  • Testade - by adriang
    Test
    [View Map in New WIndow]  [Embed Map in Url]  
  • testdwh - by dheavilin
    testdwh
    [View Map in New WIndow]  [Embed Map in Url]  
  • testee - by ryan4186
    teste
    [View Map in New WIndow]  [Embed Map in Url]  
  • Testing bus project 1 - by BusProject
    test
    [View Map in New WIndow]  [Embed Map in Url]  
  • testmap - by daily_news
    This is a test
    [View Map in New WIndow]  [Embed Map in Url]  
  • testmap_bas - by imm_bas
    test
    [View Map in New WIndow]  [Embed Map in Url]  
  • testsave - by sathishegb
    save
    [View Map in New WIndow]  [Embed Map in Url]  
  • test_bij - by bamirzada
    asdf
    [View Map in New WIndow]  [Embed Map in Url]  
First Previous Next Last Showing record 3771 to 3780 of a total 3790 : Page 378 of 379 : Go to page
This is a registered users area. Login or Create a new account
Address or Latitude & Longitudeinfo Description (Optional) info Marker
Group Nameinfo
Batch AddressesUnplotted Addresses
  • Show Zoom Control
  • Zoom Control Type
  • Show Map Type
  • Show Map Overview
  • Show Legend
  • Show Groups
Map size by pixels- x
(750 x 900 = 8.5 X 11 Full page)
Zoom Level
 
Only registered users are allowed to save maps. Login or Create a new account
 
 
Map name: 00hotshopperScan
Map description: scan activity 2010-10-01
Edit Map